Cold Rolled Steel Coil
Our Cold Rolled Steel Coil offers a range of dimensions and grades, providing excellent surface quality and mechanical properties like hardness, tensile strength, and ductility. Available in mill and trimmed-edge coils as well as slit coils, these products are ideal for sophisticated manufacturing applications, ensuring precision and reliability for your projects.
- Dimension Thickness: 0.2mm-3.0mm
- Dimension Width: 900mm-1880mm
- Inneter Diameter: 610mm
Cold Rolled Popular Grades
GB/T5213 | EN10130 | JIS G3141 | DIN1623-1 |
DC01 | DC01 | SPCC | St12 |
QUALITY FOR COLD ROLLED COILS
Drawing Quality (DQ)
Suitable to manufacturing parts through drawing and relatively complicated deforming.
Deep Drawing Quality (DDQ)
With more ductility and homogeneity than the drawing ones, they are suitable to manufacturing parts through deep drawing and complicated deforming.
Commercial Quality (CQ)
General With enough ductibility , they are suitable to simple forming bending or welding.,
Extra-Deep Drawing Quality (EDDQ)
Suitable to manufacturing parts through extra-deep drawing and more complicated deforming.
Supreme Extra-deep Drawing (SEDDQ）
Suitable to manufacturing parts through supreme extra-deep drawing and Extremely complicated deforming.
Structural Quality (SQ)
Applications where the strength, usually in load-bearing structures, of finished parts is important, as well as weldability
Cold Rolled Popular Catalog
No | Description | Steel Grade | Size | ||||
1 | Low Carbon and Ultra-low Carbon Sheets and Coils | GB/T5213 | EN10130 | JIS G3141 | DIN 1623-1 | (0.3-2.5)mm**(900-1880)mm | |
DC01 | DC01 | SPCC | St12 | ||||
DC03 | DC03 | SPCD | St13 | ||||
DC04 | DC04 | SPCE | St14 | ||||
DC05 | DC05 | SPCF | - | ||||
DC06/DC07 | DC06/DC07 | SPCG | - | ||||
2 | High Strength Interstitial Free Steel Sheets and coils | GBT 20564.3 | EN 10269 | SAE J2340 | JFS A2001 | (0.3-2.5)mm**(900-1880)mm | |
CR180IF | HC180Y | 180AT | - | ||||
CR220IF | HC220Y | 220AT | - | ||||
CR260IF | HC260Y | 260AT | - | ||||
- | - | - | JFC 340 | ||||
- | - | - | JFC390 | ||||
- | - | - | JFC440P | ||||
3 | High Strength Bake Hardening Steel Sheets and Coils | GBT20564.1 | EN 10268 | JFS A2001 | ASTM A1008/ A1008M | (0.3-2.5)mm**(900-1880)mm | |
CR140BH | - | JSC270H | - | ||||
CR180BN | HC180B | JSC340H | BHS Grade 180 | ||||
CR220BH | HC220B | - | BHS Grade 210 | ||||
CR260BH | HC260B | - | BHS Grade 240 | ||||
CR300BH | HC300B | - | BHS Grade 300 | ||||
4 | High-Strength Low Alloy Steel Sheets and Coils | GB/T 20564.4 | EN 10268 | - | ASTM A1008/A1008M | (0.3-2.5)mm**(900-1880)mm | |
CR260LA | HC260LA | - | - | ||||
CR300LA | HC300LA | HSLAS grade 310 class 2 | |||||
CR340LA | HC340LA | HSLAS grade 340 class 2 | |||||
CR380LA | HC380 | HSLAS grade 380 class 2 | |||||
CR420LA | HC420LA | HSLAS grade 410 class 2 | |||||
5 | Cold Rolled High-strength Dual-phase Steel Sheets and coils | GBT 20564.2 | JFS A2001 | SAE J2340 | SEW 097.2 | (0.3-2.5)mm**(900-1880)mm | |
CR260/450DP | - | - | H260X | ||||
CR300/500DP | - | 500 DL | H300X | ||||
CR340/590DP | JSC 590Y | 600 DL1 | H340X | ||||
CR420/780DP | JSC 780Y JSC 780Y | - | - | (0.6-2.5)mm**(900-1500)mm | |||
CR550/980DP | - | - | - | ||||
6 | The Third Generation of Advanced High-strength Steels-Q Steels | GB/T 20564.9 | BQB 418 | (1.0-2.0)mm**(900-1250)mm | |||
CR550/980QP | HC600/980QP | ||||||
7 | Hot Stamping | GB/T 34566 | (0.6-2.5)mm**(900-1600)mm | ||||
CR1000/1500HS | |||||||
CR1200/1800HS | |||||||
8 | Cold Rolled Steel Sheets and Coils for Enamelling | GB/T 13790 | EN 10209 | JIS G3133 | ASTM A424/A424 | (0.3-2.5)mm**(900-1880)mm | |
DC01EK | DC01EK | - | Type II-CS | ||||
DC03EK | DC04EK | - | Type II-DS | ||||
DC05EK | DC06EK | - | Type III | ||||
9 | Carbon Structural Steel Sheetes and Coils | GT/T 11253 | DIN 1623 | JFS G2001 | JIS G3135 | (0.3-2.5)mm**(900-1880)mm | |
- | - | JSC 390W | SPFC 390 | ||||
- | - | JSC 440W | SPFC 440 | ||||
Q195 | - | - | - | ||||
Q215 | S215G(St37-2G) | - | - | ||||
Q235 | S245(St44-3G) | - | - | ||||
Q275 | - | - | - | ||||
- | S325G(St52-3G) | - | - | ||||
10 | Phosphorus-added High-strength Steel sheets and Coils | YB/T 166 | EN 10268 | JFS A2001 | - | (0.3-2.5)mm**(900-1880)mm | |
P175 | HC180P | JSC 340W | - | ||||
P210 | HC220P | JSC 390W | - | ||||
P250 | HC260 | - | |||||
P290 | HC300P | - | |||||
11 | Steel Sheets and Coils for Flux Cored Wire | GRADE | (0.3-2.5)mm**(900-1880)mm | ||||
HS1 | |||||||
HS2 | |||||||
HS3 | |||||||
12 | Low Carbon and Ultra-low Carbon Galvanized Steels and coils | GB/T 2518 | EN 10346 | JIS G3302 | - | (0.3-2.5)mm**(900-1880)mm | |
DX51D+Z | DX51D+Z | SGCC | - | ||||
DX52D+Z | DX52D+Z | SGCD1 | - | ||||
DX53D+Z | DX53D+Z | SGCD2 | - | ||||
DX54D+Z | DX54D+Z | SGCD3 | - | ||||
DX56D+Z | DX56D+Z | SGCD4 | - | ||||
13 | High-strength Interstitial Free Galvanized Steel Sheets and Coils | GB/T 2518 | EN 10346 | GMW 3032 | ASTM A653M | (0.3-2.5)mm**(900-1880)mm | |
HX180YD+Z | HX180YD+Z | CR180IF | SHS180 | ||||
HX220YD+Z | HX220YD+Z HX220YD+Z | CR210IF | SHS210 | ||||
HX260YD+Z | HX2600YD+Z | - | - | ||||
14 | High-strength Bake-hardening Galvanized Steel Sheets and Coils | GB/T 2518 | EN 10346 | GMW 3032 | ASTM A653M | (0.3-2.5)mm**(900-1880)mm | |
HX180BD+Z | HX180BD+Z | CR180B2 | BHS180 | ||||
HX220BD+Z | HX220BD+Z | CR210B2 | BHS210 | ||||
HX220BD+Z | HX260BD+Z | CR270B2 | - | ||||
HX300BD+Z | HX300BD+Z | CR300B2 | BHS300 | ||||
15 | High-strength Low-alloy Galvanized Steel Sheets and Coils | GB/T 2518 | EN 10346 | GMW 3032 | ASTM A653 | (0.3-2.5)mm**(900-1880)mm | |
HX260LAD+Z | HX260LAD+Z | CR270LA | HSLAS-F275 | ||||
HX300LAD+Z | HX300LAD+Z | CR300LA | - | ||||
HX340LAD+Z | HX340LAD+Z | CR340 | HSLAS-F340 | ||||
HX380LAD+Z | HX380LAD+Z | CR380LA | HSLAS-F380 | ||||
HX420LAD+Z | HX420LAD+Z | CR420 | HSLAS-F4101 | ||||
16 | High-strength Dual-phase Galvanized Steel Sheet and Coils | GB/T 2519 | EN 10346 | GMW 3399 | SAE J2745 | (0.3-2.5)mm**(900-1880)mm | |
HC260/450DPD+Z | HTC450X+Z | - | DP 440T/250Y | ||||
HC300/500DPD+Z | HTC500X+Z | CR490T/290Y-DP | DP 490T/290Y | ||||
HC340/600DPD+Z | HTC600X+Z | CR590T/340Y-DP | DP 590T/340Y | ||||
HC450/780DPD+Z | HTC780X+Z | CR780T/420Y-DP | DP 780T/420Y | ||||
17 | Hot Dip Galvanized Steels | GB/T 2518 | EN 10346 | JIS G3302 | ASTM A653/A653M | (0.3-4.0)mm**(900-1880)mm | |
DX51D+Z | DX51D+Z | SGHC | CSA,CSB | ||||
S250GD+Z | S250GD+Z | SGH340 | SS37 | ||||
S280GD+Z | S280GD+Z | SGH400 | SS40 | ||||
S350GD+Z | S350GD+Z | SGH440 | SS50 | ||||
18 | Hard Cold Rolled Coils | JIS G3141-2011 | (0.2-2.5)mm**(900-1250)mm | ||||
SPCC | |||||||
SPCD | |||||||
SPCE | |||||||
19 | Annealing Steels | GB/T 5213-2008 Technical Agreements | (0.3-2.5)mm**(900-1250)mm | ||||
SPCC, SPCD, SPCE, DC01, DC03, DC04, Q235, CS(A), CS(B); DC04-N, DC04-S | |||||||
20 | High-strength Structural Steel for Automobile | Technical Agreements | (1.0-2.5)mm**(900-1250)mm | ||||
LG9000 | |||||||
LG600HC | |||||||
LG700HC | |||||||
21 | ESP Cold Rolled Steels | GB/T 3274 | EN10025-2 | JIS G 3101 | JIS 3131 | (0.6-3.0)mm**(1219-1250)mm | |
Q215B | - | SS330 | SPHC | ||||
- | - | - | SPHD | ||||
Q235B | S235JR | SS400 | - | ||||
Q355B | S355JR | - | - | ||||